Slant CNC lathe-106/108/208

Introduction:

Product Detail

Product Tags

Features

Turret Design Performance

The integrated positive Y-axis structure is highly rigid, heavy-duty, and has better performance than the interpolation Y-axis.

·Smoother and smoother plane contour processing

·Easier to process compound curved surfaces and contours

Compared with the "interpolation Y", the "positive Y" has obvious advantages in plane milling. The "positive Y" Y-axis movement is perpendicular to the X-axis and is a single-axis movement. The "interpolation Y" Y-axis movement is to interpolate a straight line through the simultaneous movement of the X-axis and the Y-axis. Compared with the "positive Y" for the flatness of the milling plane, the "positive Y" axis processing is obviously bright and smooth.

Direct Drive Synchronous Electric Spindle

High rigidity, high torque, higher efficiency, better finish, more precise indexing.

All major machine parts are made of cast iron HT300 with extremely strong shock absorption capacity.

Features of machine tools with direct-drive electric spindles

●Magnetic ring incremental encoder (sine and cosine) positioning accuracy: 20 arc seconds,

C-axis indexing accuracy: 40 arc seconds

●Fast start-stop response speed, saving machine tool time and effectively improving production capacity

●Small cutting load, energy saving and power saving, better protection of machine tools and extended service life

●Effectively eliminate spindle vibration, good balancing effect, good finish, and improve the surface finish of workpieces

(Advantages of turning instead of grinding, hard turning appearance, surface roughness Ra 0.2μm)

· The spindle motor is equipped with a cooling system to suppress the influence of thermal displacement and ensure that the spindle continues to work at a constant temperature.

(The nose end runout accuracy is within 0.002mm, ensuring more stable accuracy)

· Rear-mounted direct-drive synchronous spindle, more convenient installation and maintenance

· A2-5: 7016AC-front two rear two

· A2-6: front NN3020+100BAR10S, rear NN3018

A2-8: front NN3024+BT022B*2, rear NN3022

Heavy-duty cast iron base and components

All castings are optimized using finite element analysis (FEA) to reduce distortion and lift-off shock absorption capacity. The castings of the major series of lathes are reinforced with ribs to enhance rigidity and thermal stability. Compact and symmetrical headstock and tailstock castings further enhance rigidity and ensure high positioning accuracy and repeatability.

Technical Specifications

Item	Name	Unit	106	108	106M	108M	106MY	108MY
Travel	Max. bed rotation diameter	mm	Φ600	Φ600	Φ600	Φ600	Φ660	Φ660
	Max. machining diameter	mm	Φ380	Φ380	Φ310	Φ310	Φ330	Φ330
	Max. rotation diameter on tool holder	mm	Φ200	Φ200	Φ200	Φ200	Φ350	Φ350
	Max. processing length	mm	380	370	340	320	240	210
	Distance between two centers	mm	450	450	450	450	450	450
Spindle Cylinder Chuck	Spindle nose	ASA	A2-5	A2-6	A2-5	A2-6	A2-5	A2-6
	Hydraulic cylinder/chuck	Inch	6’’	8’’	6’’	8’’	6’’	8’’
	Spindle through hole diameter	mm	Φ56	Φ79/66	Φ56	Φ79/66	Φ66	Φ79/66
	Max. rod through hole diameter	mm	Φ46	Φ65/52	Φ46	Φ65/52	Φ45	Φ65/52
	Spindle Max. speed	rpm	5500	4300/ 4500	5500	4300	5500	4300
	Spindle motor power	kw	17.5	11/15 (18/22)	17.5	18/22	17.5	18/22
	Spindle motor torque	Nm	62-125	91-227 (73/165)	62-125	91-227	62-125	91-227
X/ZN/S axis feed parameters	X motor power	kw	1.8	1.8	1.8	1.8	1.8	1.8
	Y motor power	kw	-	-	-	-	1.2	1.2
	Z motor power	kw	1.8	1.8	1.8	1.8	1.8	1.8
	X axis travel	mm	207	207	200	200	210	210
	Y axis travel	mm	-	-	-	-	90±45	90±45
	Z axis travel	mm	433	422	420	400	320	290
	X/Z axis rail specifications	spec	35 roller	35 roller	35 roller	35 roller	35 roller	35 roller
	Y axis rail specifications	spec	-	-	-	-	25 roller	25 roller
	X axis fast move	Mm/min	30	30	30	30	24	24
	Y axis fast move	Mm/min	-	-	-	-	8	8
	Z axis fast move	Mm/min	30	30	30	30	24	24
Servo power Turret parameters	Power turret type	/	Servo turret	Servo turret	BMT45	BMT45	BMT45	BMT45
	Tool station	/	12T	12T	12T	12T	12T	12T
	M motor power	kw	-	-	5.5	5.5	5.5	5.5
	M axis motor torque	Nm	-	-	35	35	35	35
	Power head Max. speed	rpm	-	-	6000	6000	6000	6000
	Outer diameter tool holder specifications	mm	25*25	25*25	20*20	25*25	25*25	25*25
	Inner diameter tool holder specifications	mm	Φ40	Φ40	Φ40	Φ40	Φ40	Φ40
	Adjacent tool change time	sec	0.15	0.15	0.15	0.15	0.15	0.15
	Positioning accuracy	/	±2”	±2”	±2”	±2”	±2”	±2”
	Repeat positioning accuracy	/	±1”	±1”	±1”	±1”	±1”	±1”
Tailstock parameters	Programmable hydraulic tailstock	/	Hydraulic program tailstock	Hydraulic program tailstock	Hydraulic program tailstock	Hydraulic program tailstock	Hydraulic program tailstock	Hydraulic program tailstock
	Tailstock Max. travel	mm	360	360	360	360	360	360
	Sleeve diameter	mm	Φ80	Φ80	Φ80	Φ80	Φ80	Φ80
	Sleeve travel	mm	100	100	100	100	100	100
	Sleeve taper	/	MT4#	MT4#	MT4#	MT4#	MT4#	MT4#
Dimensions	Overall dimensions	m	220020001800	240020001800	220020001800	240020001900	220020001800	240020001900
Dimensions	Machine weight approx.	kg	3600	3700	3700	3800	3800	3800
Other	Cutting fluid tank volume	L	150	150	150	150	150	150
	Cooling water pump power	kw	0.75	0.75	0.75	0.75	0.75	0.75
	Hydraulic unit box volume	L	40	40	40	40	40	40
	Hydraulic oil pump motor power	kw	1.5	1.5	1.5	1.5	1.5	1.5
	Lubricating oil tank volume	L	2	2	2	2	2	2
	Automatic lubrication pump motor power	kw	50	50	50	50	50	50

Item	Name	Unit	208	208M	208MS	208MY	208MSY
Travel	Max. bed rotation diameter	mm	Φ620	Φ620	Φ680	Φ700	Φ700
	Max. machining diameter	mm	Φ510	Φ510	Φ370	Φ420	Φ300
	Max. rotation diameter on tool holder	mm	Φ300	Φ300	Φ300	Φ300	Φ300
	Max. processing length	mm	520	420	420	360	400
	Distance between two centers	mm	600	600	-	600	-
spindle Cylinder Chuck	Spindle nose	ASA	A2-6	A2-6	A2-6	A2-6	A2-6
	Hydraulic cylinder/chuck	Inch	8’’	8’’	8’’	8’’	8’’
	Spindle through hole diameter	mm	Φ79/66	Φ79/66	Φ79/66	Φ79/66	Φ79/66
	Max. rod through hole diameter	mm	Φ65/52	Φ65/52	Φ65/52	Φ65/52	Φ65/52
	Spindle Max. speed	rpm	4000/4300	4300	4300	4300	4300
	Spindle motor power	kw	18/22(11/15)	18/22	18/22	18/22	18/22
	Spindle motor torque	Nm	91-227 (73/165)	91-227 (73/165)	91-227	91-227	91-227
Sub-spindle Cylinder Chuck	Sub-Spindle nose	ASA	-	-	A2-5	-	A2-5
	Sub-Hydraulic cylinder/chuck	Inch	-	-	6”	-	6”
	Sub-Spindle through hole diameter	mm	-	-	Φ56	-	Φ56
	Sub-Max. rod through hole diameter	mm	-	-	Φ46	-	Φ46
	Sub-Spindle Max. speed	rpm	-	-	5500	-	5500
	Sub-Spindle motor power	kw	-	-	17.5	-	17.5
X/ZN/S axis feed parameters	X motor power	kw	3.0	3.0	2.5	2.5	2.5
	Y motor power	kw	-	-	-	1.2	1.2
	Z motor power	kw	3.0	3.0	2.5	2.5	2.5
	S motor power	Kw	-	-	1.2	-	1.2
	X axis travel	mm	272	216	236	262	204
	Y axis travel	mm	-	-	-	100±50	100±50
	Z axis travel	mm	570	500	510	450	492
	X/Z axis rail specifications	spec	35 roller	35 roller	35 roller	35 roller	35 roller
	Y axis rail specifications	spec	-	-	25 roller	25 roller	25 roller
	S axis travel	mm	-	-	600	-	600
	X axis fast move	Mm/min	20	20	20	20	20
	Z axis fast move	Mm/min	20	20	20	20	20
	Y axis fast move	Mm/min	-	-	-	8	8
	S axis fast move	Mm/min	-	-	24	-	24
Servo power Turret parameters	Power turret type	/	Servo turret	BMT55	BMT55	BMT55	BMT55
	Tool station	/	12T	12T	12T	12T	12T
	M motor power	kw	-	5.5	5.5	5.5	5.5
	M axis motor torque	Nm	-	35	35	35	35
	Power head Max. speed	rpm	-	6000	6000	6000	6000
	Outer diameter tool holder specifications	mm	25*25	25*25	25*25	25*25	25*25
	Inner diameter tool holder specifications	mm	Φ40	Φ40	Φ40	Φ40	Φ40
	Adjacent tool change time	sec	0.15	0.15	0.15	0.15	0.15
	Positioning accuracy	/	±2”	±2”	±2”	±2”	±2”
	Repeat positioning accuracy	/	±1”	±1”	±1”	±1”	±1”
Tailstock parameters	Programmable hydraulic tailstock	/	Hydraulic program tailstock	Hydraulic program tailstock	-	Hydraulic program tailstock	-
	Tailstock Max. travel	mm	440	440	-	440
	Sleeve diameter	mm	Φ100	Φ100	-	Φ100
	Sleeve travel	mm	100	100	-	100
	Sleeve taper	/	MT#5	MT#5	-	MT#5
Dimensions	Overall dimensions	m	260021001800	260021001800	280021001800	270024001800	270024002000
Dimensions	Machine weight approx.	kg	5000	5200	5900	5200	5300
Other	Cutting fluid tank volume	L	150	150	150	150	150
	Cooling water pump power	kw	0.75	0.75	0.75	0.75	0.75
	Hydraulic unit box volume	L	40	40	40	40	40
	Hydraulic oil pump motor power	kw	1.5	1.5	1.5	1.5	1.5
	Lubricating oil tank volume	L	2	2	2	2	2
	Automatic lubrication pump motor power	kw	50	50	50	50	50

Configuration Intro

Easier to use and more powerful

●Fully upgraded design

●Equipped with FANUC's latest CNC and servo technology

●Standardized with personalized functions

●Expanded memory capacity

Prevent sudden machine downtime through preventive maintenance

●Rich fault prediction functions

Easily locate the fault location and shorten recovery time

●Diagnosis/maintenance functions

High processing performance

Shortened cycle time

●High-efficiency processing technology

Achieve high-quality processing

Surface fine processing technology

●Diagnosis/maintenance function

High operation rate

Always support various operations at the processing site

●FANUC CNC Controller

Personalized screen is easier to use

●Standardized personalized function

●Support for a wide range of on-site networks

THK Ball Screw

·C3 grade, using high-precision ball screw, with nut pre-loading and screw pre-tensioning treatment to pre-eliminate backlash and temperature rise elongation, showing excellent positioning and repeatability accuracy.

·Servo motor direct drive to reduce backlash error.

THK Roller Linear Guide

·P grade ultra-high rigidity SRG precision grade, linear guide zero clearance, arc cutting, bevel cutting, surface texture is relatively uniform. Suitable for high-speed operation, greatly reducing the driving horsepower required for machine tools.

·Rolling instead of sliding, small friction loss, sensitive response, high positioning accuracy. It can bear the load in the moving direction at the same time, and the track contact surface is still in multi-point contact during the load, and the cutting rigidity will not be reduced.

·Easy to assemble, strong interchangeability, and simple lubrication structure; the wear amount is very small and the service life is long.

SKF bearing/oiling machine

·Automatic lubricator meets the needs of various applications, suitable for various working conditions, reliable products, flexible use.

·Meet the needs of bearing lubrication in high temperature, strong vibration and dangerous environment.

Each lubrication point uses a volumetric proportional distributor to control the lubrication amount, and the machine can be controlled by PLC to accurately supply oil.