OEM/ODM Manufacturer Gantry Milling Machine Center - Turning And Milling For Butterfly Valve – Oturn
OEM/ODM Manufacturer Gantry Milling Machine Center - Turning And Milling For Butterfly Valve – Oturn Detail:
Machine Features
This machine is a turning and milling machining center. The left side is composed of a horizontal CNC moving slide table and a CNC brake head. The right side is a horizontal CNC moving slide table, a drill head (horizontal machining center) and a tool magazine. Cylinder composition. The middle is composed of hydraulic rotary table, fixtures and other parts, and is equipped with independent electrical cabinets, hydraulic stations, centralized lubrication devices, full protection, chip conveyors, and waterways. The workpiece is manually lifted and hydraulically clamped. See the mechanism schematic for details.
The bed body adopts the integral casting form, the bed rail is precisely ground, and the contact surface of the guide rail is carefully scraped to ensure the movement precision of the machine tool and ensure the stability of the equipment.
As shown in the figure, when machining the valve body, the operator positions the required workpiece on the tooling fixture and presses the workpiece. After adjusting the position of the workpiece, operate the CNC panel and the device runs. Both ends of the equipment are processed at the same time. One end performs processing steps such as an outer circle and an end surface. At the other end, drilling, boring, and internal step processing are performed. It is equipped with a tool magazine for automatic tool change. After the butterfly valve is processed at the current position, the rotary table rotates 180°. End face and outer circle are processed after boring, and the end which outer circle and the end surface is processed for boring.
The operation is simple, and the workpiece can be processed in a plurality of processes with only one positioning. And it has greatly reduced the labor force.
Specification
|
Description |
Specification |
|
Processing range |
DN50-DN300 |
|
Power supply |
380AC |
|
Main motor power |
11Kw(Spindle servo) |
|
Z-direction feed motor |
18N·m(Servo motor) |
|
Spindle speed range（r/min） |
110/140/190 stepless |
|
The distance from Spindle to worktable |
can be customized according to workpieces |
|
Spindle nose taper hole |
1:20/BT40 |
|
Max. processing diameter |
480mm |
|
Suitable for processing valve types |
Butterfly valve body |
|
Z-direction travel |
400mm |
|
X-direction travel |
180mm(Flat Rotary table) |
|
Repeat positioning accuracy |
Z direction:0.015/X direction :0.015 |
|
Tooling form |
Hydraulic compression |
|
Lubrication method |
Centralized lubrication of electronic lubricating pumps |
|
Processing position |
Flange end, inner hole, valve stem hole of Butterfly valve body |
|
Working accuracy |
The coaxiality between the inner hole of the upper flange and the lower flange of valve body is ≤0.2mm |
|
Tooling quantity |
Machine test run tooling-1pc |
|
Toolings |
OST/TAIWAN |
Specification
|
Description |
Specification |
|
Processing range |
DN50-DN300 |
|
Power supply |
380AC |
|
Main motor power |
11Kw(Spindle servo) |
|
Z-direction feed motor |
18N·m(Servo motor) |
|
Spindle speed range（r/min） |
110/140/190 stepless |
|
The distance from Spindle to worktable |
can be customized according to workpieces |
|
Spindle nose taper hole |
1:20/BT40 |
|
Max. processing diameter |
480mm |
|
Suitable for processing valve types |
Butterfly valve body |
|
Z-direction travel |
400mm |
|
X-direction travel |
180mm(Flat Rotary table) |
|
Repeat positioning accuracy |
Z direction:0.015/X direction :0.015 |
|
Tooling form |
Hydraulic compression |
|
Lubrication method |
Centralized lubrication of electronic lubricating pumps |
|
Processing position |
Flange end, inner hole, valve stem hole of Butterfly valve body |
|
Working accuracy |
The coaxiality between the inner hole of the upper flange and the lower flange of valve body is ≤0.2mm |
|
Tooling quantity |
Machine test run tooling-1pc |
|
Toolings |
OST/TAIWAN |
Product detail pictures:
Related Product Guide:
We have now a specialist, efficiency staff to provide good quality company for our consumer. We normally follow the tenet of customer-oriented, details-focused for OEM/ODM Manufacturer Gantry Milling Machine Center - Turning And Milling For Butterfly Valve – Oturn , The product will supply to all over the world, such as: El Salvador, Bulgaria, Manchester, Each product is carefully made, it will make you satisfied. Our products in the production process have got strictly monitored, because it is only to provide you the best quality, we will feel confident. High production costs but low prices for our long-term cooperation. You can have a variety choices and the value of all types are same reliable. If you have any question, do not hesitate to ask us.
By Colin Hazel from Angola - 2017.01.11 17:15
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Delia from Mumbai - 2018.09.16 11:31
