Valve special machines have the characteristics of high efficiency, stability, high precision and long life, which are favored by valve factories. More and more valve factories use valve special machines to produce and process valve workpieces.
Let’s take a look at the safety operation rules of the valve special machine
(1) Do not touch the surface of the workpiece with your hands, and do not remove chips by hand, so as to avoid hurting people and flying chips into the eyes.
(2) Wear work clothes and work caps when the valve special machine is working, and stuff your hair in the work cap.
(3) The workpiece, fixture and tool must be firmly clamped. Otherwise, the workpiece will move or even slip out, causing the tool to break or damage, and even cause personal injury and equipment accidents.
(4) Before the valve special machine is running, the items left on the machine table should be cleaned and checked. Tools or other items should not be placed on the valve special machine at will, so as to avoid accidental injury to people after the machine tool is started. It should also be checked whether all handles, switches and control knobs of the valve machine are in the correct position. Other parts that are not in use temporarily should stay in place with their steering or control systems in neutral.
(5) The operating position of the valve special machine must be correct. Do not stand in front of the workbench to prevent the workpiece and its relatives from falling and hurting people.
(6) When loading and unloading large workpieces, lifting equipment should be used as much as possible. After the workpiece is lifted, do not stand under the workpiece to avoid accidents. After the workpiece is removed, place the workpiece in a suitable position and place it stably.
(7) When the valve special machine is running, it is forbidden to load and unload the work, adjust the tool, measure and check the workpiece and remove the chips. When the valve special machine is running, the operator shall not leave the work post.
(8) After the work of the valve special machine is finished, the electrical system of the valve special machine should be closed and the power supply should be cut off. Then do the cleaning work and lubricate the valve special machine.
Post time: Feb-18-2022