High performance main type – 1600-800-1200-1600-2000-3000 series

Introduction:

Product Detail

Product Tags

Product Configuration

Introduce

Turret Design Performance

The integrated positive Y-axis structure is highly rigid, heavy-duty, and has better performance than the interpolation Y-axis.

·Smoother and smoother plane contour processing

·Easier to process compound curved surfaces and contours

Compared with the "interpolation Y", the "positive Y" has obvious advantages in plane milling. The "positive Y" Y-axis movement is perpendicular to the X-axis and is a single-axis movement. The "interpolation Y" Y-axis movement is to interpolate a straight line through the simultaneous movement of the X-axis and the Y-axis. Compared with the "positive Y" for the flatness of the milling plane, the "positive Y" axis processing is obviously bright and smooth.

Direct Drive Synchronous Electric Spindle

High rigidity, high torque, higher efficiency, better finish, more precise indexing.

All major machine parts are made of cast iron HT300 with extremely strong shock absorption capacity.

Features of machine tools with direct-drive electric spindles

●Magnetic ring incremental encoder (sine and cosine) positioning accuracy: 20 arc seconds,

C-axis indexing accuracy: 40 arc seconds

●Fast start-stop response speed, saving machine tool time and effectively improving production capacity

●Small cutting load, energy saving and power saving, better protection of machine tools and extended service life

●Effectively eliminate spindle vibration, good balancing effect, good finish, and improve the surface finish of workpieces

(Advantages of turning instead of grinding, hard turning appearance, surface roughness Ra 0.2μm)

· The spindle motor is equipped with a cooling system to suppress the influence of thermal displacement and ensure that the spindle continues to work at a constant temperature.

(The nose end run out accuracy is within 0.002mm, ensuring more stable accuracy)

· Rear-mounted direct-drive synchronous spindle, more convenient installation and maintenance

· A2-5: 7016AC-front two rear two

· A2-6: front NN3020+100BAR10S, rear NN3018

A2-8: front NN3024+BT022B*2, rear NN3022

Heavy-Duty Cast Iron Base And Components

All castings are optimized using finite element analysis (FEA) to reduce distortion and lift-off shock absorption capacity. The castings of the major series of lathes are reinforced with ribs to enhance rigidity and thermal stability. Compact and symmetrical headstock and tailstock castings further enhance rigidity and ensure high positioning accuracy and repeatability.

Technical Specifications

Item	Name	Unit	600	610	600M	600MY
Travel	Max. bed rotation diameter	mm	Φ700	Φ700	Φ700	Φ800
	Max. machining diameter	mm	Φ670	Φ670	Φ540	Φ490
	Max. rotation diameter on tool holder	mm	Φ350	Φ350	Φ350	Φ450
	Max. processing length	mm	600	550	600	600
	Distance between two centers	mm	715	695	725	725
spindle Cylinder Chuck	Spindle nose	ASA	A2-6	A2-8	A2-6	A2-6
	Hydraulic cylinder/chuck	Inch	10”/8’’	10’’	8’’	8’’
	Spindle through hole diameter	mm	Φ79/66	Φ86	Φ79/66	Φ79/66
	Max. rod through hole diameter	mm	Φ65/52	Φ76	Φ66/52	Φ66/52
	Spindle Max. speed	rpm	4000/4500	3200	4300	4300
	Spindle motor power	kw	15/18.5	15/18.5	18/22	18/22
	Spindle motor torque	Nm	134/196	200/330	91-227	91-227
Sub-spindle Cylinder Chuck	Sub-Spindle nose	ASA	-	-		-
	Sub-Hydraulic cylinder/chuck	Inch	-	-		-
	Sub-Spindle through hole diameter	mm	-	-		-
	Sub-Max. rod through hole diameter	mm	-	-		-
	Sub-Spindle Max. speed	rpm	-	-		-
	Sub-Spindle motor power	kw	-	-		-
X/ZN/S axis feed parameters	X motor power	kw	3	3	3	3
	Y motor power	kw	-	-	-	1.8
	Z motor power	kw	3	3	3	3
	S motor power	Kw	-	-	-	-
	X axis travel	mm	340	340	315	275
	Y axis travel	mm	-	-	-	100±50
	Z axis travel	mm	640	640	700	740
	X/Z axis rail specifications	spec	45 roller	45 roller	45 roller	45 roller
	Y axis rail specifications	spec	-	-	-	-
	S axis travel	mm	-	-	-	-
	X axis fast move	Mm/min	24	24	24	24
	Z axis fast move	Mm/min	24	24	24	24
	Y axis fast move	Mm/min	-	-	-	8
	S axis fast move	Mm/min	-	-	-	-
Servo power Turret parameters	Power turret type	/	Servo turret	BMT55	Servo turret	Servo turret
	Tool station	/	12T	12T	BMT55	BMT55MY
	M motor power	kw	-	-	5.5	5.5
	M axis motor torque	Nm	-	-	35	35
	Power head Max. speed	rpm	-	-	6000	6000
	Outer diameter tool holder specifications	mm	25*25	25*25	25*25	25*25
	Inner diameter tool holder specifications	mm	Φ50	Φ50	Φ40	Φ40
	Adjacent tool change time	sec	0.15	0.15	0.15	0.15
	Positioning accuracy	/	±0.005	±0.005	±0.005	±0.005
	Repeat positioning accuracy	/	±0.003	±0.003	±0.003	±0.003
Tailstock parameters	Programmable hydraulic tailstock	/	Hydraulic program tailstock	Hydraulic program tailstock	-	Hydraulic program tailstock
	Tailstock Max. travel	mm	650	650	-	440
	Sleeve diameter	mm	Φ100	Φ100	-	Φ100
	Sleeve travel	mm	100	100	-	100
	Sleeve taper	/	MT#5	MT#5	-	MT#5
Dimensions	Overall dimensions	m	310021102100	310021102100	310021101800	310021101800
Dimensions	Machine weight approx.	kg	5200	5200	5300	5300
Other	Cutting fluid tank volume	L	250	250	250	250
	Cooling water pump power	kw	0.75	0.75	0.75	0.75
	Hydraulic unit box volume	L	40	40	40	40
	Hydraulic oil pump motor power	kw	1.5	1.5	1.5	1.5
	Lubricating oil tank volume	L	2	2	2	2
	Automatic lubrication pump motor power	kw	50	50	50	50

Item	Name	Unit	800	810	800M	800MY
Travel	Max. bed rotation diameter	mm	Φ700	Φ700	Φ700	Φ800
	Max. machining diameter	mm	Φ670	Φ670	Φ540	Φ490
	Max. rotation diameter on tool holder	mm	Φ350	Φ350	Φ350	Φ450
	Max. processing length	mm	800	750	800	800
	Distance between two centers	mm	915	895	925	925
spindle Cylinder Chuck	Spindle nose	ASA	A2-6	A2-8	A2-6	A2-6
	Hydraulic cylinder/chuck	Inch	8’’	10’’	8’’	8’’
	Spindle through hole diameter	mm	Φ79/66	Φ86	Φ79/66	Φ79/66
	Max. rod through hole diameter	mm	Φ66/52	Φ76	Φ66/52	Φ66/52
	Spindle Max. speed	rpm	4000/4500	3200	4300	4300
	Spindle motor power	kw	15/18.5	15/18.5	18/22	18/22
	Spindle motor torque	Nm	134/196	200/330	91/227	91/227
Sub-spindle Cylinder Chuck	Sub-Spindle nose	ASA	-	-		-
	Sub-Hydraulic cylinder/chuck	Inch	-	-		-
	Sub-Spindle through hole diameter	mm	-	-		-
	Sub-Max. rod through hole diameter	mm	-	-		-
	Sub-Spindle Max. speed	rpm	-	-		-
	Sub-Spindle motor power	kw	-	-		-
X/ZN/S axis feed parameters	X motor power	kw	3	3	3	3
	Y motor power	kw	-	-	-	1.8
	Z motor power	kw	3	3	3	3
	S motor power	Kw	-	-	-	-
	X axis travel	mm	350	350	320	280
	Y axis travel	mm	-	-	-	100±50
	Z axis travel	mm	840	840	900	940
	X/Z axis rail specifications	spec	45 roller	45 roller	45 roller	45 roller
	Y axis rail specifications	spec	-	-	-	-
	S axis travel	mm	-	-	-	-
	X axis fast move	Mm/min	24	24	24	24
	Z axis fast move	Mm/min	24	24	24	24
	Y axis fast move	Mm/min	-	-	-	8
	S axis fast move	Mm/min	-	-	-	-
Servo power Turret parameters	Power turret type	/	Servo turret	BMT55Servo turret	Servo turret	Servo turret
	Tool station	/	12T	12T	BMT55	BMT55
	M motor power	kw	-	-	5.5	5.5
	M axis motor torque	Nm	-	-	35	35
	Power head Max. speed	rpm	-	-	6000	6000
	Outer diameter tool holder specifications	mm	25*25	25*25	25*25	25*25
	Inner diameter tool holder specifications	mm	Φ50	Φ50	Φ40	Φ40
	Adjacent tool change time	sec	0.15	0.15	0.15	0.15
	Positioning accuracy	/	±0.005	±0.005	±0.005	±0.005
	Repeat positioning accuracy	/	±0.003	±0.003	±0.003	±0.003
Tailstock parameters	Programmable hydraulic tailstock	/	Hydraulic program tailstock	Hydraulic program tailstock	Hydraulic program tailstock	Hydraulic program tailstock
	Tailstock Max. travel	mm	850	850	850	780
	Sleeve diameter	mm	Φ100	Φ100	Φ100	Φ100
	Sleeve travel	mm	100	100	100	100
	Sleeve taper	/	MT#5	MT#5	MT#5	MT#5
Dimensions	Overall dimensions	m	350021102100	350021102100	350021101800	350021101800
Dimensions	Machine weight approx.	kg	6700	6700	6800	6800
Other	Cutting fluid tank volume	L	250	250	250	250
	Cooling water pump power	kw	0.75	0.75	0.75	0.75
	Hydraulic unit box volume	L	40	40	40	40
	Hydraulic oil pump motor power	kw	1.5	1.5	1.5	1.5
	Lubricating oil tank volume	L	2	2	2	2
	Automatic lubrication pump motor power	kw	50	50	50	50

Item	Name	Unit	1200	1200M	1200MY
Travel	Max. bed rotation diameter	mm	Φ700	Φ700	Φ800
	Max. machining diameter	mm	Φ650	Φ530	Φ450
	Max. rotation diameter on tool holder	mm	Φ350	Φ350	Φ450
	Max. processing length	mm	1150/1117	1100	1050
	Distance between two centers	mm	1185/1152	1195	1195
spindle Cylinder Chuck	Spindle nose	ASA	A2-8/A2-11	A2-8	A2-8
	Hydraulic cylinder/chuck	Inch	10"/12"	10°	10"
	Spindle through hole diameter	mm	Φ86/117	Φ86	Φ86
	Max. rod through hole diameter	mm	Φ76/102	Φ76	Φ76
	Spindle Max. speed	rpm	3200	2500	2500
	Spindle motor power	kw	15/18.5	17	17
	Spindle motor torque	Nm	200-330/440-544	170/400	170/400
Sub-spindle Cylinder Chuck	Sub-Spindle nose	ASA	-	-	-
	Sub-Hydraulic cylinder/chuck	Inch	-	-	-
	Sub-Spindle through hole diameter	mm	-	-	-
	Sub-Max. rod through hole diameter	mm	-	-	-
	Sub-Spindle Max. speed	rpm	-	-	-
	Sub-Spindle motor power	kw	-	-	-
X/ZN/S axis feed parameters	X motor power	kw	3	3	3
	Y motor power	kw	-	-	1.8
	Z motor power	kw	3	3	3
	S motor power	Kw	-	-	-
	X axis travel	mm	340	313	260
	Y axis travel	mm	-	-	-
	Z axis travel	mm	1220/1187	1220	1180
	X/Z axis rail specifications	spec	45 roller	45 roller	45 roller
	Y axis rail specifications	spec	-	-	-
	S axis travel	mm	-	-	-
	X axis fast move	Mm/min	24	24	24
	Z axis fast move	Mm/min	24	24	24
	Y axis fast move	Mm/min	-	-	8
	S axis fast move	Mm/min	-	-	-
Servo power Turret parameters	Power turret type	/	Servo turret	Servo turret	Servo turret
	Tool station	/	12T	BMT65	BMT65MY
	M motor power	kw	-	7.5	7.5
	M axis motor torque	Nm	-	47.8	47.8
	Power head Max. speed	rpm	-	6000	6000
	Outer diameter tool holder specifications	mm	25*25	25*25	25*25
	Inner diameter tool holder specifications	mm	Φ50	Φ50	Φ50
	Adjacent tool change time	sec	0.15	0.15	0.15
	Positioning accuracy	/	±0.005	±0.005	±0.005
	Repeat positioning accuracy	/	±0.003	±0.003	±0.003
Tailstock parameters	Programmable hydraulic tailstock	/	Hydraulic program tailstock	Hydraulic program tailstock	Hydraulic program tailstock
	Tailstock Max. travel	mm	1120	1120	1040
	Sleeve diameter	mm	Φ100	Φ100	Φ100
	Sleeve travel	mm	100	100	100
	Sleeve taper	/	MT#5	MT#5	MT#5
Dimensions	Overall dimensions	m	390021102100	390021102100	390021102100
Dimensions	Machine weight approx.	kg	7200	7600	7500
Other	Cutting fluid tank volume	L	300	300	300
	Cooling water pump power	kw	0.75	0.75	0.75
	Hydraulic unit box volume	L	40	40	40
	Hydraulic oil pump motor power	kw	1.5	1.5	1.5
	Lubricating oil tank volume	L	2	2	2
	Automatic lubrication pump motor power	kw	50	50	50

Item	Name	Unit	1600	1600M	1600MY
Travel	Max. bed rotation diameter	mm	Φ700	Φ700	Φ800
	Max. machining diameter	mm	Φ650	Φ530	Φ450
	Max. rotation diameter on tool holder	mm	Φ350	Φ350	Φ450
	Max. processing length	mm	1500	1500	1450
	Distance between two centers	mm	1185/1152	1195	1195
spindle Cylinder Chuck	Spindle nose	ASA	A2-8/A2-11	A2-8	A2-8
	Hydraulic cylinder/chuck	Inch	10"/12"	10°	10"
	Spindle through hole diameter	mm	Φ86/117	Φ86	Φ86
	Max. rod through hole diameter	mm	Φ76/102	Φ76	Φ76
	Spindle Max. speed	rpm	3200/2500	2500	2500
	Spindle motor power	kw	15/18.5	17	17
	Spindle motor torque	Nm	200-330/440-544	170/400	170/400
Sub-spindle Cylinder Chuck	Sub-Spindle nose	ASA	-	-	-
	Sub-Hydraulic cylinder/chuck	Inch	-	-	-
	Sub-Spindle through hole diameter	mm	-	-	-
	Sub-Max. rod through hole diameter	mm	-	-	-
	Sub-Spindle Max. speed	rpm	-	-	-
	Sub-Spindle motor power	kw	-	-	-
X/ZN/S axis feed parameters	X motor power	kw	3	3	3
	Y motor power	kw	-	-	1.8
	Z motor power	kw	3	3	3
	S motor power	Kw	-	-	-
	X axis travel	mm	340	313	260
	Y axis travel	mm	-	-	120±60
	Z axis travel	mm	1570	1620	1580
	X/Z axis rail specifications	spec	45 roller	45 roller	45 roller
	Y axis rail specifications	spec	-	-	-
	S axis travel	mm	-	-	-
	X axis fast move	Mm/min	24	24	24
	Z axis fast move	Mm/min	24	24	24
	Y axis fast move	Mm/min	-	-	8
	S axis fast move	Mm/min	-	-	-
Servo power Turret parameters	Power turret type	/	Servo turret	Servo turret	Servo turret
	Tool station	/	12T	BMT65	BMT65MY
	M motor power	kw	-	7.5	7.5
	M axis motor torque	Nm	-	47.8	47.8
	Power head Max. speed	rpm	-	6000	6000
	Outer diameter tool holder specifications	mm	25*25	25*25	25*25
	Inner diameter tool holder specifications	mm	Φ50	Φ50	Φ50
	Adjacent tool change time	sec	0.15	0.15	0.15
	Positioning accuracy	/	±0.005	±0.005	±0.005
	Repeat positioning accuracy	/	±0.003	±0.003	±0.003
Tailstock parameters	Programmable hydraulic tailstock	/	Hydraulic program tailstock	Hydraulic program tailstock	Hydraulic program tailstock
	Tailstock Max. travel	mm	1120	1120	1040
	Sleeve diameter	mm	Φ100	Φ100	Φ100
	Sleeve travel	mm	100	100	100
	Sleeve taper	/	MT#5	MT#5	MT#5
Dimensions	Overall dimensions	m	430021102100	430021102100	430021102100
Dimensions	Machine weight approx.	kg	8100/8200	8200	8200
Other	Cutting fluid tank volume	L	350	350	350
	Cooling water pump power	kw	0.75	0.75	0.75
	Hydraulic unit box volume	L	40	40	40
	Hydraulic oil pump motor power	kw	1.5	1.5	1.5
	Lubricating oil tank volume	L	2	2	2
	Automatic lubrication pump motor power	kw	50	50	50

Item	Name	Unit	2000	2000M	2000MY
Travel	Max. bed rotation diameter	mm	Φ700	Φ700	Φ800
	Max. machining diameter	mm	Φ650	Φ530	Φ450
	Max. rotation diameter on tool holder	mm	Φ350	Φ350	Φ450
	Max. processing length	mm	2050	2100	2100
	Distance between two centers	mm	2050	2100	2100
spindle Cylinder Chuck	Spindle nose	ASA	A2-11	A2-8	A2-8
	Hydraulic cylinder/chuck	Inch	12"/15"	10"	10"
	Spindle through hole diameter	mm	Φ117/132	Φ86	Φ86
	Max. rod through hole diameter	mm	Φ102/117	Φ76	Φ76
	Spindle Max. speed	rpm	3200	2500	2500
	Spindle motor power	kw	15/18.5	17	17
	Spindle motor torque	Nm	440-544	170/400	170/400
Sub-spindle Cylinder Chuck	Sub-Spindle nose	ASA	-	-	-
	Sub-Hydraulic cylinder/chuck	Inch	-	-	-
	Sub-Spindle through hole diameter	mm	-	-	-
	Sub-Max. rod through hole diameter	mm	-	-	-
	Sub-Spindle Max. speed	rpm	-	-	-
	Sub-Spindle motor power	kw	-	-	-
X/ZN/S axis feed parameters	X motor power	kw	3	3	3
	Y motor power	kw	-	-	1.8
	Z motor power	kw	3	3	3
	S motor power	Kw	-	-	-
	X axis travel	mm	340	313	260
	Y axis travel	mm	-	-	120±60
	Z axis travel	mm	2220	2220	2180
	X/Z axis rail specifications	spec	45 roller	45 roller	45 roller
	Y axis rail specifications	spec	-	-	-
	S axis travel	mm	-	-	-
	X axis fast move	Mm/min	20	20	20
	Z axis fast move	Mm/min	20	20	20
	Y axis fast move	Mm/min	-	-	8
	S axis fast move	Mm/min	-	-	-
Servo power Turret parameters	Power turret type	/	Servo turret	Servo turret	Servo turret
	Tool station	/	12T	BMT65	BMT65MY
	M motor power	kw	-	7.5	7.5
	M axis motor torque	Nm	-	47.8	47.8
	Power head Max. speed	rpm	-	6000	6000
	Outer diameter tool holder specifications	mm	25*25	25*25	25*25
	Inner diameter tool holder specifications	mm	Φ50	Φ50	Φ50
	Adjacent tool change time	sec	0.15	0.15	0.15
	Positioning accuracy	/	±0.005	±0.005	±0.005
	Repeat positioning accuracy	/	±0.003	±0.003	±0.003
Tailstock parameters	Programmable hydraulic tailstock	/	Hydraulic program tailstock	Hydraulic program tailstock	Hydraulic program tailstock
	Tailstock Max. travel	mm	2050	2080	2080
	Sleeve diameter	mm	Φ100	Φ100	Φ100
	Sleeve travel	mm	100	100	100
	Sleeve taper	/	MT#5	MT#5	MT#5
Dimensions	Overall dimensions	m	480021102100	480021102100	480021102100
Dimensions	Machine weight approx.	kg	8800	8900	9000
Other	Cutting fluid tank volume	L	400	400	400
	Cooling water pump power	kw	0.75	0.75	0.75
	Hydraulic unit box volume	L	40	40	40
	Hydraulic oil pump motor power	kw	1.5	1.5	1.5
	Lubricating oil tank volume	L	2	2	2
	Automatic lubrication pump motor power	kw	50	50	50

Item	Name	Unit	3000	3000M	3000MY
Travel	Max. bed rotation diameter	mm	Φ700	Φ700	Φ800
	Max. machining diameter	mm	Φ650	Φ530	Φ450
	Max. rotation diameter on tool holder	mm	Φ350	Φ350	Φ450
	Max. processing length	mm	3050	3100	3100
	Distance between two centers	mm	3050	3100	3100
spindle Cylinder Chuck	Spindle nose	ASA	A2-11	A2-8	A2-8
	Hydraulic cylinder/chuck	Inch	15"/12"	10"	10"
	Spindle through hole diameter	mm	117	Φ86	Φ86
	Max. rod through hole diameter	mm	Φ102	Φ76	Φ76
	Spindle Max. speed	rpm	3200	2500	2500
	Spindle motor power	kw	15/18.5	17	17
	Spindle motor torque	Nm	440-544	170/400	170/400
Sub-spindle Cylinder Chuck	Sub-Spindle nose	ASA	-	-	-
	Sub-Hydraulic cylinder/chuck	Inch	-	-	-
	Sub-Spindle through hole diameter	mm	-	-	-
	Sub-Max. rod through hole diameter	mm	-	-	-
	Sub-Spindle Max. speed	rpm	-	-	-
	Sub-Spindle motor power	kw	-	-	-
X/ZN/S axis feed parameters	X motor power	kw	3	3	3
	Y motor power	kw	-	-	1.8
	Z motor power	kw	3	3	3
	S motor power	Kw	-	-	-
	X axis travel	mm	340	313	313
	Y axis travel	mm	-	-	120±60
	Z axis travel	mm	3220	3220	3220
	X/Z axis rail specifications	spec	45 roller	45 roller	45 roller
	Y axis rail specifications	spec	-	-	-
	S axis travel	mm	-	-	-
	X axis fast move	Mm/min	24	24	24
	Z axis fast move	Mm/min	24	24	24
	Y axis fast move	Mm/min	-	-	8
	S axis fast move	Mm/min	-	-	-
Servo power Turret parameters	Power turret type	/	Servo turret	Servo turret	Servo turret
	Tool station	/	12T	BMT65	BMT65MY
	M motor power	kw	-	7.5	7.5
	M axis motor torque	Nm	-	47.8	47.8
	Power head Max. speed	rpm	-	6000	6000
	Outer diameter tool holder specifications	mm	25*25	25*25	25*25
	Inner diameter tool holder specifications	mm	Φ50	Φ50	Φ50
	Adjacent tool change time	sec	0.2	0.2	0.2
	Positioning accuracy	/	±0.005	±0.005	±0.005
	Repeat positioning accuracy	/	±0.003	±0.003	±0.003
Tailstock parameters	Programmable hydraulic tailstock	/	Hydraulic program tailstock	Hydraulic program tailstock	Hydraulic program tailstock
	Tailstock Max. travel	mm	3080	3080	3080
	Sleeve diameter	mm	Φ100	Φ100	Φ100
	Sleeve travel	mm	100	100	100
	Sleeve taper	/	MT#5	MT#5	MT#5
Dimensions	Overall dimensions	m	620023002160	620023002160	620023002160
Dimensions	Machine weight approx.	kg	15000	15000	15000
Other	Cutting fluid tank volume	L	485	485	485
	Cooling water pump power	kw	0.75	0.75	0.75
	Hydraulic unit box volume	L	40	40	40
	Hydraulic oil pump motor power	kw	1.5	1.5	1.5
	Lubricating oil tank volume	L	2	2	2
	Automatic lubrication pump motor power	kw	50	50	50

Item	Name	Unit	800MY	1200MY
Travel	Max. bed rotation diameter	mm	Φ800	Φ800
	Max. machining diameter	mm	Φ320	Φ320
	Max. rotation diameter on tool holder	mm	Φ450	Φ450
	Max. processing length	mm	800	1050
	Distance between two centers	mm	925	1195
spindle Cylinder Chuck	Spindle nose	ASA	A2-6	A2-8
	Hydraulic cylinder/chuck	Inch	8"	10°
	Spindle through hole diameter	mm	Φ79/66	Φ86
	Max. rod through hole diameter	mm	Φ66/52	Φ76
	Spindle Max. speed	rpm	4300	2500
	Spindle motor power	kw	18/22	17
	Spindle motor torque	Nm	91/227	170/400
Sub-spindle Cylinder Chuck	Sub-Spindle nose	ASA	-	-
	Sub-Hydraulic cylinder/chuck	Inch	-	-
	Sub-Spindle through hole diameter	mm	-	-
	Sub-Max. rod through hole diameter	mm	-	-
	Sub-Spindle Max. speed	rpm	-	-
	Sub-Spindle motor power	kw	-	-
X/ZN/S axis feed parameters	X motor power	kw	3	3
	Y motor power	kw	1.8	1.8
	Z motor power	kw	3	3
	S motor power	Kw	-	-
	X axis travel	mm	210	210
	Y axis travel	mm	120±50	-
	Z axis travel	mm	820	1180
	X/Z axis rail specifications	spec	45 roller	45 roller
	Y axis rail specifications	spec	-	-
	S axis travel	mm	-	-
	X axis fast move	Mm/min	8	8
	Z axis fast move	Mm/min	-	-
	Y axis fast move	Mm/min	8	8
	S axis fast move	Mm/min	-	-
Servo power Turret parameters	Power turret type	/	Servo turret	Servo turret
	Tool station	/	BMT55MY-16T	BMT55MY-16T
	M motor power	kw	5.5	7.5
	M axis motor torque	Nm	35	47.8
	Power head Max. speed	rpm	6000	6000
	Outer diameter tool holder specifications	mm	25*25	25*25
	Inner diameter tool holder specifications	mm	Φ50	Φ50
	Adjacent tool change time	sec	0.15	0.15
	Positioning accuracy	/	±0.005	±0.005
	Repeat positioning accuracy	/	±0.003	±0.003
Tailstock parameters	Programmable hydraulic tailstock	/	Hydraulic program tailstock	Hydraulic program tailstock
	Tailstock Max. travel	mm	780	1040
	Sleeve diameter	mm	Φ100	Φ100
	Sleeve travel	mm	100	100
	Sleeve taper	/	MT#5	MT#5
Dimensions	Overall dimensions	m	350021102100	390021102100
Dimensions	Machine weight approx.	kg	6800	7500
Other	Cutting fluid tank volume	L	250	300
	Cooling water pump power	kw	0.75	0.75
	Hydraulic unit box volume	L	40	40
	Hydraulic oil pump motor power	kw	1.5	1.5
	Lubricating oil tank volume	L	2	2
	Automatic lubrication pump motor power	kw	50	50

Configuration Introduction

FANUC CNC

High Processing Performance

FANUC 0i-TF PLUS system has powerful high-efficiency processing technology and intelligent servo control technology; high-efficiency processing technology shortens the sequential processing time of external signals according to the acceleration and deceleration of the action state and maximizes the use of servo capabilities, thereby reducing the processing program cycle time; intelligent servo control refers to a servo control function group that can self-optimize and adjust in real time as the machine tool conditions such as load and temperature change, achieving high-speed and high-precision processing.

High Ease Of Use

FANUC 0i-TF PLUS system has a large-capacity program memory, CF card can be used as program memory, USB program can be run with one click, CNC-QSSR function helps machine tools quickly and easily import robots, and the optional system IHMI function provides comprehensive support for work on the processing site, and provides tool information integrated management, processing time prediction, interactive dialogue programming, mechanical collision avoidance, processing data collection, maintenance management and other functions required for each process in the process of "planning", "processing" and "improvement".

High Operation Rate

The IOlinki and FSSB of FANUC Oi-TF PLUS have rich fault detection functions, which can determine the power failure of the I/O module or servo amplifier and the location of the communication cable disconnection. In addition, I/Olinki can detect the output short circuit of each DO point; in addition, the fault diagnosis function can obtain various diagnostic information on the CNC screen that helps to judge the system status when the alarm occurs, helping users to quickly repair the problem area.

THK Ball Screw

·C3 grade, using high-precision ball screw, with nut pre-loading and screw pre-tensioning treatment to pre-eliminate backlash and temperature rise elongation, showing excellent positioning and repeatability accuracy.

·Servo motor direct drive to reduce backlash error.

THK Roller Linear Guide

·P grade ultra-high rigidity SRG precision grade, linear guide zero clearance, arc cutting, bevel cutting, surface texture is relatively uniform. Suitable for high-speed operation, greatly reducing the driving horsepower required for machine tools.

·Rolling instead of sliding, small friction loss, sensitive response, high positioning accuracy. It can bear the load in the moving direction at the same time, and the track contact surface is still in multi-point contact during the load, and the cutting rigidity will not be reduced.

·Easy to assemble, strong interchangeability, and simple lubrication structure; the wear amount is very small and the service life is long.

SKF Bearing/Oiling Machine

·Automatic lubricator meets the needs of various applications, suitable for various working conditions, reliable products, flexible use.

·Meet the needs of bearing lubrication in high temperature, strong vibration and dangerous environment.

Each lubrication point uses a volumetric proportional distributor to control the lubrication amount, and the machine can be controlled by PLC to accurately supply oil.

Previous: CNC lathe-106/108/208 Series

Next: Single spindle TY200 TY750 series