Free sample for Shaft Turning Machine - Turning And Milling For Butterfly Valve – Oturn
Free sample for Shaft Turning Machine - Turning And Milling For Butterfly Valve – Oturn Detail:
Machine Features
This machine is a turning and milling machining center. The left side is composed of a horizontal CNC moving slide table and a CNC brake head. The right side is a horizontal CNC moving slide table, a drill head (horizontal machining center) and a tool magazine. Cylinder composition. The middle is composed of hydraulic rotary table, fixtures and other parts, and is equipped with independent electrical cabinets, hydraulic stations, centralized lubrication devices, full protection, chip conveyors, and waterways. The workpiece is manually lifted and hydraulically clamped. See the mechanism schematic for details.
The bed body adopts the integral casting form, the bed rail is precisely ground, and the contact surface of the guide rail is carefully scraped to ensure the movement precision of the machine tool and ensure the stability of the equipment.
As shown in the figure, when machining the valve body, the operator positions the required workpiece on the tooling fixture and presses the workpiece. After adjusting the position of the workpiece, operate the CNC panel and the device runs. Both ends of the equipment are processed at the same time. One end performs processing steps such as an outer circle and an end surface. At the other end, drilling, boring, and internal step processing are performed. It is equipped with a tool magazine for automatic tool change. After the butterfly valve is processed at the current position, the rotary table rotates 180°. End face and outer circle are processed after boring, and the end which outer circle and the end surface is processed for boring.
The operation is simple, and the workpiece can be processed in a plurality of processes with only one positioning. And it has greatly reduced the labor force.
Specification
|
Description |
Specification |
|
Processing range |
DN50-DN300 |
|
Power supply |
380AC |
|
Main motor power |
11Kw(Spindle servo) |
|
Z-direction feed motor |
18N·m(Servo motor) |
|
Spindle speed range（r/min） |
110/140/190 stepless |
|
The distance from Spindle to worktable |
can be customized according to workpieces |
|
Spindle nose taper hole |
1:20/BT40 |
|
Max. processing diameter |
480mm |
|
Suitable for processing valve types |
Butterfly valve body |
|
Z-direction travel |
400mm |
|
X-direction travel |
180mm(Flat Rotary table) |
|
Repeat positioning accuracy |
Z direction:0.015/X direction :0.015 |
|
Tooling form |
Hydraulic compression |
|
Lubrication method |
Centralized lubrication of electronic lubricating pumps |
|
Processing position |
Flange end, inner hole, valve stem hole of Butterfly valve body |
|
Working accuracy |
The coaxiality between the inner hole of the upper flange and the lower flange of valve body is ≤0.2mm |
|
Tooling quantity |
Machine test run tooling-1pc |
|
Toolings |
OST/TAIWAN |
Specification
|
Description |
Specification |
|
Processing range |
DN50-DN300 |
|
Power supply |
380AC |
|
Main motor power |
11Kw(Spindle servo) |
|
Z-direction feed motor |
18N·m(Servo motor) |
|
Spindle speed range（r/min） |
110/140/190 stepless |
|
The distance from Spindle to worktable |
can be customized according to workpieces |
|
Spindle nose taper hole |
1:20/BT40 |
|
Max. processing diameter |
480mm |
|
Suitable for processing valve types |
Butterfly valve body |
|
Z-direction travel |
400mm |
|
X-direction travel |
180mm(Flat Rotary table) |
|
Repeat positioning accuracy |
Z direction:0.015/X direction :0.015 |
|
Tooling form |
Hydraulic compression |
|
Lubrication method |
Centralized lubrication of electronic lubricating pumps |
|
Processing position |
Flange end, inner hole, valve stem hole of Butterfly valve body |
|
Working accuracy |
The coaxiality between the inner hole of the upper flange and the lower flange of valve body is ≤0.2mm |
|
Tooling quantity |
Machine test run tooling-1pc |
|
Toolings |
OST/TAIWAN |
Product detail pictures:
Related Product Guide:
Our solutions are broadly acknowledged and dependable by users and may meet consistently developing economic and social requires for Free sample for Shaft Turning Machine - Turning And Milling For Butterfly Valve – Oturn , The product will supply to all over the world, such as: Greenland, Cologne, Zurich, Based on our automatic production line, steady material purchase channel and quick subcontract systems have been built in mainland China to meet customer's wider and higher requirement in recent years. We have been looking forward to cooperating with more clients worldwide for common development and mutual benefit!Your trust and approval are the best reward for our efforts. Keeping honest, innovative and efficient, we sincerely expect that we can be business partners to create our brilliant future!
By Caroline from moldova - 2017.05.31 13:26
We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
By Emma from British - 2017.12.09 14:01
