Double Spindle TY200 TY750 Series

Introduction:


Product Detail

Product Tags

Product Configuration

Introduce

The 30° inclined layout and integrated bed base structure greatly improve the bending and torsional rigidity of the machine tool during operation. The high rigidity and high stability integrated bed base provide a strong guarantee for the high precision of the whole machine.

The spindle unit is an independent sleeve type. The spindle system has undergone rigorous dynamic balancing tests, with high precision, good precision retention, small thermal deformation, and good thermal stability. The Max. speed can reach 4500rpm, and the nose end runout accuracy is within 0.003MM. The front end of the shaft uses a large-diameter high-precision double-row roller bearing with a combined angular contact ball bearing structure, and the optimal span two-point balanced support design can withstand radial and axial loads. It can also be suitable for users to perform high-speed precision cutting and low-speed heavy cutting. It is especially suitable for mass production of products with complex shapes, high precision requirements, and high finish.

The high-rigidity overall design servo turret is matched with a high-precision clutch to ensure its positioning accuracy and repeat positioning accuracy. The servo motor drives the cutter head to rotate in both directions or select the tool at any nearby place. The hydraulic principle is used to loosen and clamp the clutch, and the proximity switch is used to feedback the clutch action signal to quickly and accurately achieve the tool change action.

The programmable hydraulic tailstock has a high rigidity structure and an integral tailstock, which can eliminate vibration and has excellent stability. It can be controlled by program or manual buttons, and the sleeve extension and retraction is realized by hydraulic cylinder, which is convenient, fast and reliable.

The feed system is directly driven by a servo motor, with good rigidity, precision and dynamic response characteristics. The machine tool is equipped with a roller linear guide rail, and the Max. fast moving speed can reach: 20m/min.

This machine provides users with a complete hydraulic and lubrication system, using high-quality hydraulic pumps and hydraulic valves and other components to greatly reduce the failure rate. The hydraulic and lubrication system design is simple and reliable. The machine tool adopts centralized quantitative automatic lubrication.

The Taiwan rotary chuck cylinder is used, equipped with an automatic chip removal device, which can greatly reduce the labor intensity of the operator and achieve safe and efficient production. The above functional components can all be controlled programmatically, and various special fixtures can be designed and installed according to the special requirements of users.

Technical Specifications

Item Model

Name

Unit

200MSY

200MS

Travel

Max. bed rotation diameter

mm

Ф660

Ф660

Max. processing diameter

mm

Ф370

Ф320

Max. processing diameter on tool holder

mm

Ф300

Ф300

Max. processing length

mm

380

400

Max. rod through hole diameter of main spindle/sub-spindle

mm

Ф46/46

Ф46/46

Spindle

Cylinder

Chuck

Spindle nose

/

A2-5

A2-5

Spindle through hole diameter

mm

Ф56

Ф56

Spindle Max. speed

rpm

5500

5500

Direct drive spindle motor power

kw

17.5

17.5

Direct drive spindle motor torque

Nm

62-125

62-125

Spindle hydraulic cylinder/chuck

/

6"

6"

Sub-spindle Chuck

Sub-spindle nose

/

A2-5

A2-5

Sub-spindle through hole diameter

mm

Ф56

Ф56

Sub-spindle Max. speed

rpm

5500

5500

Direct drive spindle motor torque

Nm

62-125

17.5

Direct drive sub-spindle motor power

kw

17.5

62-125

Sub-spindle hydraulic cylinder/collet

/

6"

6"

X/Z/Y/W axis feed

Parameters

X/Z/Y/S motor power X

kw

2.5/2.5/1.2/1.2

2.5/2.5/1.2

X/Z axis travel

mm

320/470

210/490

Y/S axis travel

mm

90(±45)/440

440

X/Z/Y/S axis fast movement

mm/min

24/24/8/24

24/24/24

Slide type

mm

Roller 35

35滚柱

Positioning accuracy

mm

±0.005

±0.005

Repeat positioning accuracy

mm

±0.003

±0.003

Servo power

Turret parameters

Power turret type

/

BMT55-12T

BMT55-12T

Power turret power/torque

Kw

5.5/35

5.5/35

Power tool holder Max. speed

rpm

6000

6000

Outer diameter tool holder specifications

mm

25*25

25*25

Inner diameter tool holder specifications

mm

Ф40

Ф40

Adjacent tool change time

sec

0.2

0.2

Dimensions

Occupied area Approx.

mm

2600*2100*1900

2600*2100*1900

Machine weight Approx.

kg

4200

4200

Other

Cutting fluid tank volume

L

150

150

Hydraulic unit box volume

L

40

40

Hydraulic oil pump motor power

kw

1.5

1.5

Lubricating oil tank volume

L

2

2

Automatic lubrication pump motor power

W

50

50

Cooling water pump power

W

750

750

Configuration Features

Easier To Use And More Powerful

●Fully upgraded design

●Equipped with i HMI

●Equipped with FANUC's latest CNC and servo technology

●Standardized with personalized functions

Expanded memory capacity

Ease Of Use

Prevent sudden machine downtime through preventive maintenance

●Rich fault prediction functions

Easily locate the fault location and shorten recovery time

●Diagnosis/maintenance functions

High processing performance

Shortened Cycle Time

●High-efficiency processing technology

Achieve high-quality processing

Surface fine processing technology

●Diagnosis/maintenance function

High Operation Rate

Always support various operations at the processing site

●FANUC

Personalized Screen Is Easier To Use

●Standardized personalized function

Initiatives in the field of IoT

●Support for a wide range of on-site networks

img (2)

THK Ball Screw

img (4)

·C3 grade, using high-precision ball screw, with nut pre-loading and screw pre-tensioning treatment to pre-eliminate backlash and temperature rise elongation, showing excellent positioning and repeatability accuracy.

·Servo motor direct drive to reduce backlash error.

THK Roller Linear Guide

img (3)

·P grade ultra-high rigidity SRG precision grade, linear guide zero clearance, arc cutting, bevel cutting, surface texture is relatively uniform. Suitable for high-speed operation, greatly reducing the driving horsepower required for machine tools.

·Rolling instead of sliding, small friction loss, sensitive response, high positioning accuracy. It can bear the load in the moving direction at the same time, and the track contact surface is still in multi-point contact during the load, and the cutting rigidity will not be reduced.

·Easy to assemble, strong interchangeability, and simple lubrication structure; the wear amount is very small and the service life is long.

SKF Bearing/Oiling Machine

img (5)
img (6)

·Automatic lubricator meets the needs of various applications, suitable for various working conditions, reliable products, flexible use.

·Meet the needs of bearing lubrication in high temperature, strong vibration and dangerous environment.

Each lubrication point uses a volumetric proportional distributor to control the lubrication amount, and the machine can be controlled by PLC to accurately supply oil.


  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us