China Manufacturer for Cnc Vertical Lathe Machine - Turning Drilling And Tapping Combined Machine – Oturn
China Manufacturer for Cnc Vertical Lathe Machine - Turning Drilling And Tapping Combined Machine – Oturn Detail:
Machine Features
This machine is a multi-station turning, drilling and tapping combined machine . The left and right sides are composed of a boring turning head and a numerical control moving slide table, the feed is controlled by a numerical control system; the third side is composed of 1 boring turning head, 2 drilling heads, 1 flange drilling head, and 1 tapping head; The 5 heads on the third side can move horizontally with the CNC sliding table to exchange stations, and also can be fed separately for processing; the middle is composed of a hydraulic rotary table, a hydraulic fixture and other parts. It is also equipped with an independent electrical cabinet, hydraulic station, centralized lubrication device, full protection, water cooling system, automatic chip removal device and other components. The workpiece is manually loaded & unloaded and clamped hydraulically.
Specification
Power supply |
380AC |
Boring head Main motor power |
5.5Kw |
Feed motor |
15N·m servo motor |
Boring head Spindle speed range (r/min) |
110/143/194 Spindle stepless speed regulation |
Distance from spindle center to bed |
385mm (specifically set according to the workpiece) |
Taper hole at the end of the spindle |
1:20 |
Drilling head main motor power |
2.2Kw |
Feed motor |
15N·m servo motor |
Taper hole at the spindle end |
BT40 |
Porous drill bit Main motor power |
2.2Kw |
Feed motor |
15N·m servo motor |
Taper hole at the spindle end |
BT40 (with multi-axis device) |
Tapping head main motor power |
3Kw |
Feed motor |
15N·m servo motor |
Control system |
Huadian CNC system |
Protection form |
Full protection |
Maximum machining workpiece length |
200mm |
Maximum machining diameter |
200mm |
Flat rotating plate diameter |
φ300mm (set according to the required tool travel |
Z axis travel |
350mm |
X axis travel |
110mm |
Rapid traverse feed (mm/min) |
X direction 3000 Z direction 3000 |
Repeat positioning accuracy |
X direction 0.01 Z direction 0.015 |
Tooling form |
hydraulic clamping |
Lubrication method |
Centralized lubrication by electronic lubrication pump |
Product detail pictures:
Related Product Guide:
We pursue the administration tenet of "Quality is exceptional, Provider is supreme, Name is first", and will sincerely create and share success with all clientele for China Manufacturer for Cnc Vertical Lathe Machine - Turning Drilling And Tapping Combined Machine – Oturn , The product will supply to all over the world, such as: Bahamas, Bangladesh, Paraguay, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
By Althea from New York - 2018.11.22 12:28
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Belinda from Estonia - 2018.10.09 19:07