Big discounting Vertical Turning Lathe - Turning Drilling And Tapping Combined Machine – Oturn
Big discounting Vertical Turning Lathe - Turning Drilling And Tapping Combined Machine – Oturn Detail:
Machine Features
This machine is a multi-station turning, drilling and tapping combined machine . The left and right sides are composed of a boring turning head and a numerical control moving slide table, the feed is controlled by a numerical control system; the third side is composed of 1 boring turning head, 2 drilling heads, 1 flange drilling head, and 1 tapping head; The 5 heads on the third side can move horizontally with the CNC sliding table to exchange stations, and also can be fed separately for processing; the middle is composed of a hydraulic rotary table, a hydraulic fixture and other parts. It is also equipped with an independent electrical cabinet, hydraulic station, centralized lubrication device, full protection, water cooling system, automatic chip removal device and other components. The workpiece is manually loaded & unloaded and clamped hydraulically.
Specification
Power supply |
380AC |
Boring head Main motor power |
5.5Kw |
Feed motor |
15N·m servo motor |
Boring head Spindle speed range (r/min) |
110/143/194 Spindle stepless speed regulation |
Distance from spindle center to bed |
385mm (specifically set according to the workpiece) |
Taper hole at the end of the spindle |
1:20 |
Drilling head main motor power |
2.2Kw |
Feed motor |
15N·m servo motor |
Taper hole at the spindle end |
BT40 |
Porous drill bit Main motor power |
2.2Kw |
Feed motor |
15N·m servo motor |
Taper hole at the spindle end |
BT40 (with multi-axis device) |
Tapping head main motor power |
3Kw |
Feed motor |
15N·m servo motor |
Control system |
Huadian CNC system |
Protection form |
Full protection |
Maximum machining workpiece length |
200mm |
Maximum machining diameter |
200mm |
Flat rotating plate diameter |
φ300mm (set according to the required tool travel |
Z axis travel |
350mm |
X axis travel |
110mm |
Rapid traverse feed (mm/min) |
X direction 3000 Z direction 3000 |
Repeat positioning accuracy |
X direction 0.01 Z direction 0.015 |
Tooling form |
hydraulic clamping |
Lubrication method |
Centralized lubrication by electronic lubrication pump |
Product detail pictures:
Related Product Guide:
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for Big discounting Vertical Turning Lathe - Turning Drilling And Tapping Combined Machine – Oturn , The product will supply to all over the world, such as: Dubai, Austria, Somalia, Our technical expertise, customer-friendly service, and specialized products make us/company name the first choice of customers and vendors. We are looking for your inquiry. Let's set up the cooperation right now!
By Sally from France - 2017.11.20 15:58
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Rae from Johannesburg - 2018.09.12 17:18